[PROBLEM] prosze o sprawdzenie.

[matek1509]

witam... mam pytanie dotyczace logowania na serwer wlasny niemoge sie zalogowac pisze mi ze loguje sie ale to trwa bez konca wstawiam pliki ktore moga byc pomocne do zdiagnozowania mojego problemu.

loginserver.properties

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 5.65.234.124
ExternalHostname = 5.65.234.124

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 192.168.0.2
InternalHostname = 192.168.0.2

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: 127.0.0.1
LoginserverHostname = 127.0.0.1

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15

# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = true

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = false

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = false

# Flood Protection. All values are in MILISECONDS.
# Default: False
EnableFloodProtection = false

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50

# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver

# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)
Login = root

# Database connection password
Password = 1509198

# Default: 10
MaximumDbConnections = 10

# Default: 1
MaximumDbIdleTime = 1

# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True

# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = false

# Default: False
Assert = false

# Default: False
Developer = false



serwer porpients

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: 5.65.234.124
ExternalHostname = 5.65.234.124
# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: 192.168.0.2
InternalHostname = 192.168.0.2

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777

# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver

# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)
Login = root

# Database connection password
Password = 1509198

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = true

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/L2j

# Define how many players are allowed to play simultaneously on your server.
# Default: 10
MaximumOnlineUsers = 10

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# Default: 1
MinProtocolRevision = 1

# Default: 999
MaxProtocolRevision = 999

# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7



host
127.0.0.1 localhost
5.65.234.124 l2authd.lineage2.com
5.65.234.124 l2testauthd.lineage2.com
216.107.250.194 nprotect.lineage2.com

juz nie wiem co robic przyczytalem wszystkie wątki na temat tego problemu ale niestety nic sie u mnie nie sprawdzilo

[Maniac]

127.0.0.1 localhost
127.0.0.1 l2authd.lineage2.com
127.0.0.1 l2testauthd.lineage2.com
216.107.250.194 nprotect.lineage2.com

- InternalHostname = 192.168.0.2
+ InternalHostname = 127.0.0.1

5.65.234.124? watpie zebys mial takie zewn ip

- ExternalHostname = 5.65.234.124
+ ExternalHostname = *

[Matim]

Regulamin przeczytałeś ? Nie , to dlaczego piszesz ?

[Maślan]

dla autora:

wszelkie konfigi dajesz w bloki [.code]kod[./code].

Dla Maniac:

Widać nie czytasz regulaminu

Dla matima:

Dać im po minusie.

[Matim]

Dla matima:

Dać im po minusie.

Następnym razem tak zrobię .

@Maniac , w regulaminie w pierwszym pkt wyraźnie pisze , że jeżeli ktoś nie stosuje się do regulaminu to NIE POMAGAMY aby zdeterminować innych do stosowania się do regulaminu .

@matek1509 tak jak napisał Maślan , w regulaminie piszę , że wszelkie kody itp umieszcza się w

Kod [Zaznacz] Rozwiń

lub :

Dodatkowo w regulaminie działu podrzędnego pisze, że tematy, w których opisujemy jakiś problem zaczynamy od :

[Problem]

a nie :

[PROBLEM] , [PR0BL3M] , [Pr0bLeM] lub inne tego typu

Można pomyśleć, że się czepiam , ale wtedy to będzie wasza opinia , a w tym wypadku nie będę o nią dbał . Dla autora postu , masz 24h na poprawę tematu , w przeciwnym razie otrzymasz minusa , a Twój temat zostanie usunięty .

Na razie macie słowne ostrzeżenia ... Na prawdę denerwuję mnie ostatnio zjawisko "fali" nowych użytkowników, którzy nie pokuszą się o zerknięcie do podpiętych tematów, użyć opcji szukaj, a nawet nie raczą czytać regulaminu.